Filter
Top Products
Transmission
18
1
If memory runs out while storing an original
If you run out of memory while storing an original (free space reaches 0%), the
message “
Memory is full. Cannot scan more. Transmitting only
scanned pages.
” is displayed. Press [Exit] to transmit stored pages only.
Note
❒ When this happens, only the scanned pages are sent. If you want to delete the
scanned pages and cancel transmission in this case, contact your service rep-
resentative.
Immediate Transmission
Immediate Transmission is possible with standard fax transmission and IP-Fax
transmission.
Important
❒ Internet Fax is executed in only Memory Transmission that starts transmis-
sion automatically after storing documents in memory. If you specify Imme-
diate Transmission in Internet Fax, the mode is switched to Memory
Transmission while an e-mail address is being entered.
❒ Group cannot be used for Immediate Transmission. You cannot send the
same document to multiple destinations (broadcasting). If you specify broad-
cast or transmission for a group, the machine changes automatically to Mem-
ory Transmission.
A Make sure that [Immed. TX] is selected.
B Place the original.
The original can be placed anytime before the {Start} key is pressed.