Filter
Top Products
Sub Transmission Mode
139
2
Standard Message Stamp
Use this function to stamp a standard message at the top of the first original sent.
There are four types of standard messages: “Confidential”, “Urgent”, “Please
phone”, and “Copy to corres. section”
You can also program other messages.
Important
❒ While this function is in use, the third line of the Label Insertion is not printed.
❒ When there is an image around the area where the standard message is to be
stamped, that image is deleted.
❒ Program a standard message in “Program / Change / Delete Standard Mes-
sage” in the Facsimile Features menu. See “Facsimile Features”, General Set-
tings Guide.
A Place the originals, and then select the scan settings you require.
B Press [Sub TX Mode].
C Press [Std. Message].
D Select the standard message to be stamped, and then press [OK].
Programmed standard messages are shown in the keys.
The selected standard message is shown above the highlighted [Std. Message].
To cancel the selection, press [Cancel]. The display returns to that of step
C
.
E Press [OK].
F Specify the destination, and then press the {Start} key.
The machine cannot stamp multiple standard messages.