Filter
Top Products
Reception
170
3
The originator can request transfer of e-mail sent to another fax machine by spec-
ifying the e-mail address as follows:
❖ Fax Number
fax=destination fax number@host name of this machine.domain name
Example: to transfer to fax number 212-123-4567:
fax=2121234567@abc.company.com
❖ Single destination programmed in the destination list
fax=qregistration number of 5 digits or less@host name of this machine.do-
main name
Example: to transfer to the destination number 00001:
fax=q00001@abc.company.com
❖ Group destination programmed in the destination list
fax=qppregistration number of 5 digits or less@host name of this ma-
chine.domain name
Example: to transfer to the destination programmed under Group number
00004:
fax=qpp00004@abc.company.com
Note
❒ If an e-mail transfer request is received when the “SMTP RX File Delivery Set-
tings” is “Off” in the Facsimile Features menu, this machine responds with an
error message to the SMTP server.
❒ You can make settings that limit transfer to specified originators.
❒ Using this function, you can also send documents from your e-mail applica-
tion to e-mail addresses and G3 fax machines' destinations through this ma-
chine simultaneously.
❒ For the maximum number of destinations you can program in a group, see
“Maximum Values”.
Reference
p.287 “Maximum Values”
“Facsimile Features”, General Settings Guide
JBIG Reception
If you use JBIG (Joint Bi-level Image Experts Group) compression, you can send
photographic originals faster than with other methods of compression. It allows
you to receive documents sent in the JBIG format through JBIG Transmission.
Important
❒ This function is not available with Internet Fax function.
❒ If ECM is turned off in the Facsimile Features menu, JBIG Reception is unavailable.
Reference
“Facsimile Features”, General Settings Guide