Filter
Top Products
Combined Function Operations
32
2
Multi-Access
You can carry out another job using a different function while the current job is
being performed. Performing multiple functions simultaneously in this manner
is called “Multi-Access”.
This allows you to handle your jobs efficiently, regardless of how the machine is
being used. For example:
• While making copies, you can scan documents to store in the Document Serv-
er.
• While printing documents stored in the Document Server, the machine can
receive print data.
• While executing print jobs, you can make operations for copying.
Note
❒ See p.54 “Print Priority” to set function priority. By default, the [Display Mode]
is set to first priority.
❒ When the optional finisher is installed on the machine, you can specify the
output tray to which documents are to be delivered. For more information
about how to specify the output tray for each function, see the following de-
scriptions:
• p.55 “Output: Copier”
• p.55 “Output: Document Server”
• p.56 “Output: Printer”
-
--
-Function Compatibility
The chart below shows sample operations when “Print Priority” is set to “Inter-
leave”. See p.54 “Print Priority”.
|: Simultaneous operations are possible.
$: Operation is enabled when the relevant function key is pressed and remote
switching (of the scanner) is done.
❍: Operation is enabled when the {
{{
{Interrupt}
}}
} key is pressed to interrupt the pre-
ceding operation.
→: Operation is performed automatically once the preceding operation ends.
×: The operation must be started once the preceding operation ends. (Simultane-
ous operations are not available.)
VenusC1_GB_zen_Pre_FM.book Page 32 Tuesday, January 17, 2006 3:27 PM