Filter
Top Products
Settings You Can Change with User Tools
57
4
Note
❒ Default: 8
1
/
2
"
×
13"L
Output Tray Setting
Limitation
❒ You cannot interrupt the current stapling job even when a stapling job is spec-
ified with a different function.
❒ When the optional finisher is installed and stapling or shift-sorting is speci-
fied, the job will be delivered to the finisher shift tray regardless of the output
tray specified.
Tray Paper Settings
❖
❖❖
❖ Paper Tray Priority: Copier (Copier/Document Server)
You can specify the paper tray from which paper is to be supplied.
Note
❒ Default: Tray 1
❖
❖❖
❖ Paper Tray Priority: Printer (Printer)
You can specify the paper tray from which paper is to be supplied.
Note
❒ Default: Tray 1, LCT
❒ The default tray switches to LCT if the optional large capacity tray (LCT)
is installed.
❖
❖❖
❖ Paper Thickness Setting
You can specify the paper thickness setting.
• Tray1-3
• Thin (52-71g/m
2
)
• Normal (72-126g/m
2
)
• Thick 1 (127-156g/m
2
)
• Bypass Tray
• Thin (52-71g/m
2
)
• Normal (72-126g/m
2
)
• Thick 1 (127-156g/m
2
)
• Thick 2 (157-256g/m
2
)
Note
❒ Default: Normal (72-126g/m
2
))
❒ Only [Thick 2 (157-256g/m
2
)] can be selected for the bypass tray.
❒ Copying onto paper heavier than 127 g/m
2
takes twice as long.
VenusC1_GB_zen_Pre_FM.book Page 57 Tuesday, January 17, 2006 3:27 PM