Ricoh 8025e Printer User Manual


 
When a Message Is Displayed
27
3
When a Message Is Displayed
This section describes the machine's main messages. If other messages appear,
follow their instructions.
Message Cause Solution
Put original
back, check it
and press
[Start].
Original jammed during Memo-
ry Transmission.
Place originals that have not been
scanned on the exposure glass or
ADF again.
Error occurred,
and transmis-
sion was can-
celled.
A document jam or an error oc-
curred during Immediate
Transmission. There may be a
problem with the machine or
the telephone line (for example
noise or cross talk).
Press [OK], and then resend the
pages that have not been sent. If the
error reoccurs frequently, contact
your service representative.
Cannot detect
original size.
Place original
again, then
press [Start].
The machine failed to detect the
size of the original.
Place original again, and then press
the {Start} key.
L
Call Service
Functional
problems with
facsimile.
Please call ser-
vice.
There is a problem with the fax. Record the code number shown in
the display and contact your ser-
vice representative. Other func-
tions can be used.
Memory is full.
Cannot scan
more. Transmit-
ting only
scanned pages.
The memory is full. If you press [Exit], the machine re-
turns to standby mode and starts
transmitting the stored pages.
Check the pages that have not been
sent using the Communication Re-
sult Report, and then resend those
pages.
Remove the paper
from Internal
Tray 1.
The Internal Tray 1 is full. Remove the paper. If the other tray
is also full, the tray name shown in
the display changes. Remove pa-
per from the tray indicated in the
display.