Filter
Top Products
Troubleshooting When Using the Printer Function
48
4
Reference
“Printer Features”, General Settings Guide
The selected
file(s) which you
do not have ac-
cess privileges
to could not be
deleted.
You have tried to delete
files without the authori-
ty to do so.
Files can be deleted by the person who
created the file. To delete a file which
you are not authorized to delete, contact
the person who created the file.
Updating the des-
tination list...
Please wait.
Specified desti-
nation(s) or
sender's name has
been cleared.
The destination list is be-
ing updated from the
network using SmartDe-
viceMonitor for Admin.
Depending on the num-
ber of destinations to be
updated, there may be
some delay before you
can resume operation.
Operations are not possi-
ble while this message is
displayed.
Wait until the message disappears. Do
not switch off the power while this mes-
sage is displayed.
Parallel I/F
board has a prob-
lem.
An error has occurred in
the parallel interface
board.
Turn off the main power switch, and
back on again. If the message appears
again, contact your service representa-
tive.
Printer font er-
ror.
An error has occurred in
the font settings.
Check the font settings.
Memory Overflow
Maximum capacity of PCL
or PostScript 3 list display
has been exceeded.
Reduce the value of [Resolution] in the
printer driver, or select [Frame Priority]
from [Memory Usage] in [System] (see
“Printer Features”, General Settings
Guide). If this message continues to ap-
pear after taking these steps, decrease
the number of files sent to the machine.
Message Cause Solution