Filter
Top Products
19
What to Do upon Opening the Carton
Installing ink cartridges for the first time after purchase requires three SOL INK cleaning cartridges. This is also the case when you are
draining ink in preparation for transport, then reinstalling the ink cartridges.
2
3
1
Turn on the main power switch at the back of the unit.
Press the [POWER] key on the operation panel.
The display appears. Make sure an empty drain bottle is installed, then
press the [ENTER] key on the operation panel.
Insert cleaning cartridges into the ink-cartridge ports shown by flashing on the display. Insert the three cartridges firmly, as far
as they will go. Washing starts. While the operation is in progress, remove the cartridges and insert them again. Follow the
messages on the display to carry out the procedure.
Ink cartridge ports
SOL INK cleaning cartridge
[ K C M c m Y ]
* Insert into the ink cartridge ports shown by flashing
on the display.
4
(Continued on the next page.)
INSTALL
DRAIN BOTTLE
SET CL-LIQUID
[KCMcmY]
Use only SOL INK. Do not insert any other type of ink cartridge.
NOTICE