Filter
Top Products
63
User's Reference
You cannot set an align point when a line connecting the
left and right crop marks is slanted by 5 degrees or more
or when the left and right crop marks are misaligned front
to back by 20 mm or more. Adjust the loaded position of
the material.
Crop marks and the like drawn with computer programs cannot be used as crop marks.
When you have set the align point at the upper right crop mark, correction for length is performed automatically without
using the offset value set with [CUTTING ADJ.]. For more information about [CUTTING ADJ.], refer to "Aligning the
Printing Length and Cutting Length" elsewhere in this chapter.
Within 5 degrees, or
within 20 mm (13/16 in.)
in the sheet-feed direction