Filter
Top Products
55
User's Reference
Environment Matching
Printing length in the direction of carriage movement may be affected by changes in the operating environment (temperature and humidity).
This may result in misalignment of the printing or cutting location in the carriage-movement direction.
If this happens, then follow the steps below to perform automatic adjustment and optimize it to the operating environment.
Press the [MENU] key and [ ] key to make the
following screen appear on the display.
1
Press the [ENTER] key.
When material is loaded, the message shown in the
figure appears. Remove the material, then press the
[ENTER] key again.
2
User's Reference
The printing carriage moves and the printing length in
the carriage-movement direction is adjusted.
While automatic adjustment is in progress, the following
message appears on the display.
3
When automatic adjustment ends, the screen returns to
the display in step 1.
4
NOW PROCESSING...
MENU
ENV. MATCH
REMOVE THE SHEET