Filter
Top Products
46
Maintenance
You can use [INK LEFT] on the display menu to check how much ink is left after the ink cartridges have been installed.
Use this information as a guide for replacing the ink cartridges.
If a partially used ink cartridge is removed and reinstalled, or if a partially used ink cartridge is installed, the cartridge is taken to be
unused, and the displaced amount of remaining ink is not true.
Press the [MENU] key and [
] key to make the
following screen appear on the display.
1
Press the [ ] key to make the following screen
appear on the display.
The fewer the markers, the less is the amount of ink
left.
2
MENU
INK LEFT
K = Black / C = Cyan / M = Magenta /
c = Light Cyan / m = Light Magenta /
Y = Yellow
Remaining ink
Much
Little
No marker
Check how much ink remains
Cleaning the Printing Heads
Switching on the sub power automatically performs maintenance operations, including cleaning of the printing head. This means that
there is normally no need to perform cleaning otherwise.
If drop-out occurs with printed images, clean the printing head.
* After cleaning, carry out a printing test. Load material.
The cleaning causes a certain amount of head wear and also consumes a certain amount of ink, so use should be kept
to a minimum.
[POWERFUL] results in faster head wear and also uses up much ink. (Performing cleaning from the [POWERFUL]
menu uses up about 57 cc of ink for six colors. This is because the process discharges all ink in the ink tube and
replaces it with fresh ink.)
K C M
c m Y