Filter
Top Products
Start Up
UltraLink User Manual
8
Start Up
Power On
Connect the UltraLink to a power source and turn the power switch on. If the green
power led on the front panel does not illuminate, turn the power off, check your
power source, and wait at least 15 seconds before turning power on again.
After the UltraLink completes a self-test and start-up, it displays the connect login
screen. If you have connected the video loop cable, your monitor may remain blank
for up to 25 seconds before a login screen appears.
If no login screen appears, check the connections as shown in Figure 3.
Figure 5 The connect login screen