Filter
Top Products
Appendix A. Rack mount
UltraLink User Manual
52
Appendix A. Rack mount
The rack mount kit includes the following items:
Two black anodized mounting brackets.
Four 6 - 32 x 3/8” flat head mounting screws.
To rack mount your UltraLink unit, attach the two rack mounting brackets to your Unit
with the short flange against the Unit using the four screws provided. Secure the
mounting brackets to the rack using the appropriate size bolts, nuts and lock washers.
Using hardware other than that provided could cause damage to the electronics and/or
result in loss of mounting integrity. Do not over tighten the screws used to mount the
Unit to the mounting brackets.
The following general guidelines should be observed when installing your Unit into a
rack.
a). The UltraLink is designed to work in an ambient temperature of 0
ο
C to 45
ο
C
(32
ο
F – 113
ο
F).
b). Do not block power supply vents or otherwise restrict airflow when rack-
mounting this Unit.
c). Mechanical loading of the rack should be considered to prevent instability and
possible tipping over.
d). Tighten all connectors securely and provide adequate strain relief for all
cables.
e). Provide a grounded power source to all Units. Pay special attention to overall
branch circuit load ratings before connecting equipment to this source.
Overloaded circuits are potential fire hazards and can cause equipment
failures or poor performance.
Rack mount illustration