Filter
Top Products
Installing the UltraLink Viewer
UltraLink User Manual
14
You may choose the folder in which you install the Viewer. Start the Viewer using
one of the items optionally created by the Setup Wizard: Desktop icon, Quick
Launch icon, or Windows Start Menu entry.
Using the Viewer for the First Time
IMPORTANT Pass-through mode takes control of your keyboard and mouse
away from your computer and passes it to a remote computer
attached to the UltraLink. To regain control of your computer’s
keyboard and mouse: hold down the Ctrl, Alt and P keys
simultaneously. You may also use mouse escape movements
defined in the Settings menu to exit pass-through mode.
Full-screen mode takes control of your monitor and uses the
whole screen to display a remote computer’s screen. To regain
control of your monitor, hold down the Ctrl, Alt and F keys
simultaneously. Exiting pass-through mode also returns control
from full-screen mode.
Connect
Click the Connect icon in toolbar of the UltraLink Viewer and wait for the login box
to appear.
Login
Login with the default administrator account: admin user name and no password.
After a moment, you should see the video attached to the UltraLink. When the pass-
through warning message appears, click the OK button to forward your local
keyboard and mouse to the remote computer. If you are prompted with the full-
screen warning message, click the Cancel button.
Administrator Tasks
If you are an administrator, you may also change the default administrator account
user ID and password at this time. Other administration tasks are:
• Add user IDs and passwords
• Specify the type of encryption between the UltraLink and a Viewer
• Add an inactivity disconnect timer for Viewers
• Enable KVM switch features in the Viewer