Filter
Top Products
Configuration Settings
UltraLink User Manual
28
Connections
The Connections tab displays and maintains a list of UltraLink locations to which a
Viewer may connect. A location is a name of your choosing to identify the
UltraLink.
UltraLink Locations
Three items describe each UltraLink location in the list: location name, connection
type, and address. When you select a location in the list, the Viewer displays
corresponding parameters in the Connect Using and IP Address fields. You may add,
rename, or remove a location using the Add Location, Edit Location and Delete
Location buttons. Changes made in the Connection Settings dialog reflect in the
Connect menu and in the Connect Selection box on the toolbar.
The buttons bring up a dialog. On entering the dialog, the currently selected location
in the UltraLink select list box on the toolbar displays. The location may not be
edited or deleted if the Viewer is connected to that location. On leaving the dialog,
the location selected in the list is also selected in the UltraLink select list box on the
toolbar.
Add Location
The Add Location button define a new location to be added to the list of UltraLink
locations. A dialog is provided where the name of the new location can be specified.
After adding the location, it is selected so that its parameters can be defined.
Edit Location
The Edit Location button brings up a dialog to change the name of the location.
Because the UltraLink locations list is sorted, renaming the location may change its
position in the list.
Delete Location
The Delete Location button removes the selected location from the list.
Connect Using
The only valid choice is TCP/IP at this time.
IP Address or Domain Name
This field specifies a TCP/IP address or domain name of an UltraLink to which the
Viewer may connect. A TCP/IP address takes the form: nnn.nnn.nnn.nnn. A
domain name: ultralink.mycompany.com.