Filter
Top Products
Menu Commands
UltraLink User Manual
20
Connect
The Connect menu contains the Connect and Disconnect commands. See also
Connecting and Logging In.
Connect
Figure 16 Connect command
The connect command displays all UltraLink units configured by the Viewer. You
may select any UltraLink on the menu to initiate a connection.
Disconnect
Selecting the Disconnect command disconnects the Viewer from the UltraLink. The
Disconnect command is enabled when the Viewer is connected and is disabled when
not connected.
View
View menu commands control the remote computer’s image in the display area. See
also
View Modes.