Filter
Top Products
Configuration Settings
UltraLink User Manual
30
Keyboard and Mouse
The Keyboard and Mouse tab defines hotkeys and mouse escape movements.
Hot Keys
Hotkeys use keystrokes to perform the following actions:
• Enable or disable
pass-through mode
• Enable or disable
full-screen view
• Send Ctrl+Alt+Del to a remote computer
• Send Alt+Tab to a remote computer
Activate hot keys in one of two ways: simultaneously press the Ctrl and Alt keys and
hotkey, or press and lift the Ctrl key and then press a hot key within 2 seconds. The
second option provides an alternative in case the first option conflicts with an
application on the remote computer. For example, Ctrl+Alt+P is also a command in
Microsoft Word. Note that the second option may conflict with function keys on a
KVM switch.
You may choose any letter in the alphabet to represent a hotkey, as long as it is not
used as another hotkey.
Active
The Active checkbox enables the hotkey fields in the dialog. If you clear Fast
Mouse Movement and Slow Mouse Movement in the check boxes on the same
dialog, the Viewer automatically checks the Active checkbox to prevent you
from disabling all methods of exiting pass-through mode.
Trigger
The Trigger list defines key sequences to activate a hotkey. The options are Ctrl
+ Alt, Ctrl-down Ctrl-up, and Both. The Ctrl + Alt key enables the hotkey if you
hold down the Ctrl, Alt and the hotkey at the same time. The Ctrl-down Ctrl-up
key sequence enables the hotkey if you press and release the left Ctrl key and
then press and release the hotkey. Both indicates that both the Ctrl + Alt and the
Ctrl-down Ctrl-up key sequences may be used.
Alt+Tab
The Alt + Tab hotkey sends an Alt + Tab key sequence to the remote computer
and does not depend on whether the Viewer is in pass-through mode or not.