Filter
Top Products
Configuration Settings
UltraLink User Manual
34
Switch Settings Table
The switch settings table displays the port assignments of the attached device and
contains three columns – Port, Name and Key Code.
Port
The Port column displays the port numbers for each port on the device and is
not editable.
Name
The Name column displays the name of the computer on the port. By default, the
name assigned to the port is “Computer” followed by the port number. You may
change this name and use up to a maximum 32 characters.
Key Code
The Key Code column describes keyboard events used to switch a KVM switch
from one port to another. Key code is in a specified format. The Key Code
column may be edited only for custom KVM switches. After editing, a
validation of the entered key codes is performed. If a key code is invalid, but
may be converted to the correct format, the Viewer modifies the key code and
displays the change made. If the entered key code cannot be converted to the
required format, the entry is rejected.
Figure 24 Assigning names to port numbers