Filter
Top Products
14.2 <
Installing accessories>
Activating the added memory in the PS printer
properties
After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver in order to use it.
1 Make sure that the PostScript printer driver is installed on your
computer. For details about installing the PS printer driver, see
Software section.
2 Click the Windows Start menu.
3 For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
4 Select the Samsung CLX-8380 Series PS printer.
5 Click the right mouse button on the machine icon and select
Properties.
6 For Windows 2000/XP/2003/Vista, select Device Settings.
7 Select the amount of memory you installed from
Printer Memory
in
the
Installable Options
section.
8 Click OK.
Replacing the Stapler
When the stapler is completely empty, the message for installing the
staple cartridge appears on the display screen.
1 Open the finisher cover.
2 Pull the stapler unit out.
3 Lift the empty staple cartridge from the stapler unit.
4 Unpack the new staple cartridge.
5 Place the staple cartridge back into the stapler unit.
6 Slide the stapler unit in until it locks in place.
7 Close the finisher cover.