9.4 <
Using USB flash memory>
Original Type
You can set the original document type in order to enhance the quality of
a document being scanned.
Press USB > Scan to USB > the Image tab > Original Type. Select the
appropriate option and press OK.
• Text: For originals that have text or line art.
• Text/Photo: For originals that have both text and photographs
together.
• Photo: For originals that are continuous tone photographs.
Color Mode
Use this option to scan the original in
Mono
, Gray or
Color
mode.
Press USB > Scan to USB > the Image tab >
Color Mode
. Select the
appropriate option and press OK.
•
Color
: Uses color to display an image. 24 bits per pixel, 8 bits for
each RGB, is used for 1 pixel.
• Gray: Uses the black gradation to display an image. 8 bits per
pixel.
•
Mono
: Displays an image in black and white. 1 bit per pixel.
Darkness
You can select the degree of darkness of the scanned output. If your
original document is light or faded, press the right arrow to make the
output darker.
Press USB > Scan to USB > the Image tab > Darkness. Press right
arrow to enhance the darkness degree then, press OK.
Erase Background
You can lighten, reduce or deletes the dark background from scanning
colored paper or newspaper originals.
Press USB > Scan to USB > the Image tab >
Erase Background
. Select
On
and press OK.
Scan to Edge
You can set the machine to scan full size of a page as it is. Usually, the
machine scans a page except edges, which means the margin,
especially when you do the copy job with certain sized paper in the tray.
But if you scan and sent it right away via the network, as the file, the
machine does not need to exclude the edges from the originals.
Press USB > Scan to USB > the Image tab > Scan to Edge. Select
On
and press OK.
Quality
You can use this option to produce a high quality document. Higher
quality you select a larger file size you get.
Press USB > Scan to USB > the Output tab > Quality.
Scan Preset
This feature allows you to use optimized settings for your specific scan job.
Press USB > Scan to USB > the Output tab > Scan Preset.
• Sharing and Printing: Produces a small-sized file for normal
quality documents.
• High Quality Printing: Set this option for high quality output with
the largest file size.
• Archival Record: For the electronic file which is of the smallest file
size of the output.