Filter
Top Products
10.6 <
Machine status and advanced setup>
Network Setup
You may set up the network with the machine's touch screen. Before
doing that, you must have the information concerning the type of network
protocols and computer system you use. If you are not sure which setting
to use, contact your network administrator to configure this machine
network.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK.
3 Press the Setup tab > Network Setup.
Option Description
TCP/IP Protocol Select appropriate protocol and configure
parameters to use the network environment.
Note: There are lots of parameters to be set,
therefore, if you are not sure, leave as it is, or
consult the network administrator.
Ethernet Speed You can select the communication speed for
Ethernet connections.
Clear Setting Reverts the network settings to the default
values.
Authentication
This feature lets you control and lock all outgoing data, or change the
password.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, then enter
password and press OK.
3 Press the Setup tab > Authentication.