Filter
Top Products
11.4 <
Maintenance>
6 Hold the toner cartridge and align it with the corresponding slot
inside the machine. Insert it back into its slot until it locks in place.
7 Close the front cover, then the side cover.
8 Make sure that the cover is securely latched and then turn the
machine on.
Caution
If the cover is not completely closed, the machine will not
operate.
Replacing the toner cartridge
The machine uses four colors and has a different toner cartridge for each
one: yellow (Y), magenta (M), cyan (C), and black (K).
When the toner cartridge is totally empty.
• The status LED and the toner-related message on the display
indicates which each individual toner cartridge should be replaced.
• The machine stops printing. Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of
the toner cartridge for your machine. (Page 13.1)
1 Turn the machine off, then wait a few minutes for the machine to
cool.
2 Open the side cover.
Note
Toner particles can be released inside the machine but it
does not mean the machine is damaged. Contact a service
representative when print quality problems occur.
3 Open the front cover.
4
Pull the corresponding toner cartridge out from the
machine
.