Filter
Top Products
Scanning_ 79
disconnect the USB cable and reconnect it. If the problem
continues,refer to the Image Capture’s help.
4. Set the scan options on this program.
5. Sca
n and save your scanned image.
• For more information about using Image Capture, refer to the
Image Capture’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant software, such as
Adobe Photoshop.
• If scanning does not operate in Image Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
Scanning with network
1. Make sure that the machine is connected to your computer and powered
on.
2. Load originals face up into the document feeder , or place a single
original face down on the scanner glass.
(See "Loading originals" on page 36.)
3. Star
t Applications and click Image Capture.
4. For Mac OS X
10.4 ~ 10.5
Click Device
s and click Browse Devices.
For Mac OS X 10.6
Select your device below SHARED. Skip to
step 7.
5. For Mac OS X
10.4:
Select your machine in Twain devices option. Make sure that Use
TWAIN software checkbox is checked, and click Connect.
• If a warning message appears, click Change Port.. to select port.
• If TWAIN UI appears, from the Preference tab, click Change Port..
to select port.
Refer to Scan and Fax Manager for Change Port.. use. (See
"Setting scan information in Scan and Fax Manager" on
page 79.)
For Mac OS X 10.5:
Make sure that Connected checkbox is checked beside your machine in
Bonjour Devices.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
abo
ve.
6. Set
the scan options on this program.
7. Sca
n and save your scanned image.
• For more information about using Image Capture,refer to the
Image Capture’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.
• If scanning does not operate in Image Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.3.9 or higher and Mac OS X 10.4.7 or higher.
Setting scan information in Scan and Fax Manager
To find out about Scan and Fax Manager program information, to check
the installed scan driver's condition, to change scan settings. and to add
or delete the folders where scanned documents to computer are saved
in Scan and Fax Manager program, follow these instructions:
1. From th
e Smart Panel menu on Status bar, click Scan and Fax
Manager.
2. Select the appropriate machine from the Scan and Fax Manager .
3. Pr
ess Properties.
4. Use Set
Scan Button to change the file destination or scan settings,
to add or delete application programs, and to format files. You can
change the scanning machine by using Change port. (Local or
Network)
5. Whe
n done, press OK.
LINUX SCANNING
You can scan a document using the Unified Driver Configurator window.
Scanning
1. Double-click the Unified Driver Configurator on your desktop.
2. Click the button to switch to Scanners Configuration.
3. Se
lect the scanner on the list.
If you use only one machine device and it is connected to the computer
and turned on, your scanner appears on the list and is automatically
selected.
If you have two or more scanners connected to your computer, you can
se
lect any scanner to work at any time. For example, while acquisition is
in progress on the first scanner, you may select the second scanner, set
the device options and start the image acquisition simultaneously.
4. Click Pr
operties.
5. L
oad originals face up into the document feeder, or place a single
original face down on the scanner glass.
(See "Loading originals" on page 36.)
6. Fro
m the Scanner Properties window, click Preview.
The document is scanned and the image preview appears in the