Filter
Top Products
Management tools_ 96
USING THE LINUX UNIFIED DRIVER
CONFIGURATOR
Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified
Driver Configurator (See "Installing the Linux Unified Driver" on page 27).
After the driver is installed on your Linux system, the Unified Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Start
up Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
To use the on screen help, click Help.
3. After chang
ing the configurations, click Exit to close the Unified Driver
Configurator.
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
Printers tab
View the current system’s printer configuration by clicking on the
machine icon button on the left side of the Unified Driver Configurator
window.
The printer control buttons are, as follows:
• Refresh: Renews the available machines list.
• Add Pr
inter: Allows you to add a new machines.
• Remove Printe
r: Removes the selected machine.
• Set as
Default: Sets the current selected machine as a default
machine.
• St
op/Start: Stops/starts the machine.
• Test: Allows you to print a test page to ensure the machine is
working
properly.
• Properties: Allows you to view and change the printer properties.
1 Printers
Configuration
2 Scanners
Configuration
3 Ports
Configuration
1
Switches to Printers configuration.
2
Shows all of the installed machine.
3
Shows the status, model name and URI of your machine.