Filter
Top Products
Machine status and advanced feature_ 90
You can also print the machine's status information and browse status
with SyncThru™ Web Service. Open the Web browser on your
networked computer and type the IP address of your machine. When
SyncThru™ Web Service opens, click Information > Print
information.
MENU OVERVIEW
The control panel provides access to various menus to set up the machine
or use the machine's functions. These menus can be accessed by pressing
Machine Setup, Job Status, or touching menus on the display screen.
Refer to the following table.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
Main screen
The main screen is shown on the display screen on the control panel. Some
menus are grayed out depending on your model.
Fax Report You can set to print the
information of a fax reports.
• Multi Send Report:
When
you fax to several destinations,
set this option to print a
transmission report. Select On
to print out a confirmation
report every time you send a
fax. Select On-Error to print
out a report only when a
transmission error occurs.
• Fax Send Report
Appearance:
You can select
whether the image on the
confirmation report shows or
not.
• Fax Sent/Received Report:
Select On to have the machine
store all transmission logs and
print out after every 50 logs.
Select Off to have the machine
store the log but not print out.
• Fax Send Report: The
machine prints the
confirmation report after each
fax job, only when you send a
fax to one destination.
E-mail
Confirmation
Report
The report shows the job of
scanning and sending it via Scan
to Email.
• On:
A report is printed
whether a job is successfully
completed or not.
• Off: No report is printed.
• On-Error: A report is printed
only when an error occurs.
Scan to Server
Confirmation
The report shows the job of
scanning and sending it via SMB
and FTP.
• On:
A report is printed
whether a job is successfully
completed or not.
• Off: No report is printed.
• On-Error: A report is printed
only when an error occurs.
OPTION SUB-OPTION DESCRIPTION