Filter
Top Products
Special Notes 1. Use the Print Position commands (V and H) to locate the new area
for the duplicate image (see page 4-59).
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axes will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable ranges for these fields are as follows:
CL408 CL412 CL608 CL612
Horizontal
aaaa
cccc
0001
to
0832
0001
to
1248
0001
to
1216
0001
to
1984
Vertical
bbbb
dddd
0001
to
1424
0001
to
2136
0001
to
1424
0001
to
2136
Section 4. Programming Reference
Page 4-329001035 Rev. ESATOCL SeriesPrinters