Filter
Top Products
Reference Point command to the sample data stream may help to adjust the print for
your labels. See the following two examples or refer to the Base Reference Point
command description.
For example, the following illustrates a sample data stream for a CL612 printer and
the resulting label assuming a 6.5 inch wide label:
<ESC>A
<ESC>H0050<ESC>V0100<ESC>L0303<ESC>XMSATO
<ESC>H0050<ESC>V0200<ESC>B103100*SATO*
<ESC>H0070<ESC>V0310<ESC>L0101<ESC>XUSATO
<ESC>Q1
<ESC>Z
If you are using a 2 inch wide label, the entire image may not appear on your label.
By adding the following Base Reference Point command to the second line of the data
Label
6.5"
2"
Label
6.5"
SATO
H=50
V=100
V=200
V=310
H=70
SATO
Section 4. Programming Reference
SATOCL Series Printers9001035 Rev. EPage 4-7