SATO CL608VA Printer User Manual


 
Faaaabcccc
ddee
Sequential Numbering. Allows the printing of sequencing fields (text,
bar codes) where all incrementing is done within the printer.
aaaa = Number of times to repeat the same data (0001-9999)
b = Plus or minus symbol (+ for increments; - for decrements)
cccc = Value of step for sequence (001-9999)
dd = No. of digits for sequential numbering (01-99, default = 8)
ee = No. of digits free from sequential numbering (01-99, default = 0)
Page 4-70
FWaaHbbbb Horizontal Line. Prints a horizontal line. Units of measurement are
dots.
Page 4-48
CL408 CL412 CL608 CL612
aa = Width of Horizontal Line 01 to 99
bbbb = Length of Horizontal Line 0001-0832 0001-1248 0001-1216 0001-1984
FWaabbVccc
Hdddd
Box. Prints a box. For values aa, bbbb, cc, and dddd, see instructions
for horizontal and vertical lines. Units of measurement are dots.
Page 4-48
CL408 CL412 CL608 CL612
aa = Width of Horizontal Side 01 to 99
bb = Width of Vertical Side 01 to 99
cccc = Length of Vertical Side 0001-1424 0001-2136 0001-1424 0001-2136
dddd = Length of Horizontal Side 0001-0832 0001-1248 0001-1216 0001-1984
FWccVddd Vertical Line. Prints a vertical line. Units of measurement are dots. Page 4-48
CL408 CL412 CL608 CL612
cc = Width of Vertical Line 01 to 99
dddd = Length of Vertical Line 0001-1424 0001-2136 0001-1424 0001-2136
FXaaabccc
dddeee
Data Matrix. Sequential Numbering. Prints sequential numbered Data
Matrix 2-D symbols.
aaa = Number of duplicate labels (001-999)
b = Increment or decrement
+ Increment
- Decrement
ccc = Increment/decrement steps (001-999)
ddd = Sequential numbering start position (001-999). Referenced
to left side.
eee = Incremented data length (001-999). Measured from start
position.
Page 4-101
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Quick Reference
Page A-49001035 Rev. ESATOCL SeriesPrinters