Filter
Top Products
Printer Output
Special Notes 1. The value specified for Print Quantity (see Page 4-61) should be
equal to the number of different sequential values desired
multiplied by the number of repeats specified.
Example:
To print 2 sets each of the numbers 1001-1025 on separate
labels, we need 50 total labels. The commands would be as
follows:
<ESC>A
<ESC>H0100<ESC>V0100<ESC>F002+001<ESC>XM1001
<ESC>Q50
<ESC>Z
2. It is necessary to specify the print position for each sequential field
on a label.
3. Up to eight different sequential fields can be specified per label.
4. This command ignores alpha characters in the sequential number
field.
5. This command can not be used with the following commands:
Copy Image, Page 4-31
Reverse Image, Page 4-66
Line Feed, Page 4-50
Section 4. Programming Reference
SATOCL Series Printers9001035 Rev. EPage 4-73