SATO CL608VA Printer User Manual


 
Off-Line
Command Structure <ESC>@,nnn.....n
nnn..nn = alphanumeric message to be displayed on LCD.
Maximum of 32 characters
Example: See above
Placement: Anywhere in the print job between <ESC>A and <ESC>Z
Default: None
Command Function To specify the printer to come to an off-line state. When used within a
print job, the printer goes off-line after finishing the print job.
Input to Printer
<ESC>A
<ESC>@
. . . Job . . .
<ESC>Z
Printer Output There is no printer output for this command. The printer is placed in
the Off-Line mode as soon as the current print job is finished.
Special Notes 1. You must press the LINE key on the front panel to return the printer
to an on-line status (see Operator Panel in Section 2 of this
manual).
2. Remember, when using this command, that if the print job specifies
<ESC>Q10, all ten labels will print before the printer will go
off-line.
Section 4. Programming Reference
Page 4-549001035 Rev. ESATOCL SeriesPrinters