Filter
Top Products
7. If a job contains elements out of the memory range, it is ignored.
8. This command cannot be used with the <ESC>AX and <ESC>AR
Expanded Print Length commands or the <ESC>R Rotate,
Moving Base Reference Point command.
9. If the Forms Overlay command <ESC>& is used with a Memory
Card to expand the print area, the Form Overlay length is still
limited to 14".
CL408 CL412 CL608 CL612
Standard Print
Length
1424 dots
7.0 in.
178 mm
2136 dots
7.0 in.
178 mm
1424 dots
7.0 in.
178 mm
2136 dots
7.0 in.
178 mm
Expanded with
<ESC>AX
Command
2848 dots
14.0 in.
356 mm
4272 dots
14.0 in.
356 mm
2848 dots
14.0 in.
356 mm
Requires
Memory Card
to expand.
Maximum Length with Memory Card
(2)
128 Kbyte 1257 dots
6.2 in.
157 mm
838 dots
2.7 in.
69 mm
860 dots
4.2 in.
107 mm
528 dots
1.7 in.
44 mm
512 Kbyte 5038 dots
24.8 in.
629 mm
3359 dots
10.9 in.
278 mm
3447 dots
16.9 in.
430 mm
2113 dots
6.9 in.
176 mm
1 Mbyte 9999 dots
(1)
49.2 in.
1249 mm
6720 dots
22.0 in.
560 mm
6896 dots
32.9 in.
862 mm
4227 dots
13.6 in.
352 mm
2 Mbyte 9999 dots
(1)
49.2 in.
1249 mm
9999 dots
(1)
32.8 in.
833 mm
9999 dots
(1)
49.2 in.
1249 mm
8455 dots
27.7 in.
704 mm
(1) Limited by the number of digits in the command field.
(2) When a Memory Card is used to expand the print length, the card capacity is
used instead of the internal memory, not in addition to the internal memory.
Section 4. Programming Reference
Page 4-849001035 Rev. ESATOCL SeriesPrinters