Filter
Top Products
Settings You Can Change with User Tools
119
5
❖
❖❖
❖ Copy Order in Combine
You can set the copy order when
using the Combine function to Left
to Right or Top to Bottom.
Note
❒ Default: From left to right
❖
❖❖
❖ Image Repeat Separation Line
You can select a separation line
and color using the Image Repeat
function from: None, Solid, Broken
A, Broken B, or Crop Marks.
• None
• Solid
• Broken A
• Broken B
• Crop Marks
Note
❒ Default: None
❒ Line color (Full Color): Yellow,
Red, Cyan, Magenta, Green,
Blue, Black
❒ Separation lines cannot be spec-
ified when using [None].
❒ In “Black and White”, printing
will be done in black; in “Single
Color”, printing will be done in
the specified color; in “Two-
Color” (standard), printing will
be done in the specified color of
the black area; and in “Two-
Color” (Red and Black), print-
ing will be done in black.
❒
An image of approximately 1.5mm
will not be displayed as the width
of the separation line, when spec-
ifying solid or broken lines.
❖
❖❖
❖ Double Copies Separation Line
You can select a separation line us-
ing the Double Copies function
from: None, Solid, Broken A, Bro-
ken B, or Crop Marks.
• None
• Solid
• Broken A
• Broken B
• Crop Marks
GCAH090E
0827JupiterC1_Copy_EN_F1_FM.book Page 119 Thursday, September 4, 2003 5:06 PM