Filter
Top Products
Copying
82
2
Slip Sheets
Every time the originals' page chang-
es, a slip sheet is inserted. This func-
tion can be used to automatically
insert a slip sheet between OHP
transparencies, or as a stacking func-
tion. You can also copy onto slip
sheets.
Preparation
Before selecting this function, set
the tray for slip sheets. See “Slip
Sheet Tray” in “Tray Paper Set-
tings”, General Settings Guide.
Note
❒ Load slip sheets in the same size
and orientation as copy paper or
OHP transparencies.
❖
❖❖
❖ When using OHP transparencies from
the bypass tray
• Copy
• Blank
Note
❒ Press the {
{{
{#}
}}
} key and select [OHP
Sheet] in Special paper. See p.24
“When copying onto OHP Trans-
parencies or Thick Paper”.
❒ Paper will be delivered to the ex-
ternal tray when copying onto
OHP transparencies or thick paper
from the bypass tray, even if you
have specified not to use the exter-
nal tray as the output tray.
A
AA
A
Press [Cover/Slip Sheet].
B
BB
B
Press [Slip Sheet].
C
CC
C
Select [Copy] or [Blank], and then
press [OK].
D
DD
D
Select the paper tray containing
the sheet paper to copy the origi-
nals.
When using OHP transparencies,
open the bypass tray.
E
EE
E
Place the originals, and then press
the {
{{
{Start}
}}
} key.
1
2
3
1
2
3
2
1
2
1
0827JupiterC1_Copy_EN_F1_FM.book Page 82 Thursday, September 4, 2003 5:06 PM