Filter
Top Products
Specifications
136
6
❖
❖❖
❖ Series Copies
• The machine sets the reproduction ratio automatically to meet the paper
size and copies the originals together onto the paper.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within acceptable range. However, with some ratios, parts of the
image might not be copied.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• You cannot copy with originals different in size and orientation.
• If the number of originals scanned is less than a multiple of 4, the last page
is copied blank.
• In Magazine mode, the copying may take some time after scanning origi-
nals.
• When the booklet finisher is installed, if you select Saddle Stitch function
in Magazine mode, the machine staples and folds the paper in the center,
then delivers the paper folded.
❖
❖❖
❖ Image Repeat
Depending on the paper size, ratio, and orientation, parts of repeated images
may not be copied.
❖
❖❖
❖ Centering
Though the original is set to a different orientation from the paper loaded, the
machine will not rotate the image by 90° (Rotate copy).
0827JupiterC1_Copy_EN_F1_FM.book Page 136 Thursday, September 4, 2003 5:06 PM