Savin c3224 Printer User Manual


 
Specifications
134
6
When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or
Auto Reduce/Enlarge function,
Blank part will appear. Check ori-
entation.
message may appear depending on the orientation of origi-
nals and paper you placed. In this case, change the paper orientation.
When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
Auto Reduce/Enlarge or Auto Paper Select
With image rotation in Auto Tray Switching of User Tools
If you select Saddle Stitch function with the booklet finisher, the machine
staples and folds the paper in the center, then delivers the paper folded.
If you select Saddle Stitch function in Magazine mode, the machine staples
the paper, and folds it like a book, then delivers the paper folded.
Punch
When using Punch and Combine, Double Copies, or Auto Reduce/En-
large, the message
Blank part will appear. Check orientation.
may appear because of the orientation of the original and the copy paper.
If this occurs, change the orientation of the copy paper.
Since punch holes are made in each copy, the punch hole positions vary slightly.
Punchable paper sizes are as follows:
The punch hole positions change according to the orientation of the paper
selected.
2 tray finisher
Punch kit type
2 & 4 holes type 2 holes
L
A3-B5 JIS, 11"
×
17"
K
A4-A5, 8
1
/
2
"
×
11"
4 holes
L
A3, B4 JIS, 11"
×
17"
K
A4, B5 JIS, 8
1
/
2
"
×
11"
4 holes type 4 holes
L
A3-B5 JIS, 11"
×
17"
K
A4-A5, 8
1
/
2
"
×
11"
2 & 3 holes type 2 holes
L
A3-B5 JIS, 11"
×
17"
K
A4-A5, 8
1
/
2
"
×
11"
3 holes
L
A3, B4 JIS, 11"
×
17"
K
A4, B5 JIS, 8
1
/
2
"
×
11"
Booklet finisher
Punch kit type
2 holes type 2 holes
L
A3, A4, B5 JIS, 11"
×
17", 8
1
/
2
"
×
14", 8
1
/
2
"
×
11"
K
A4, 8
1
/
2
"
×
11"
4 holes type 4 holes
L
A3, A4, B4 JIS, B5 JIS, 11"
×
17", 8
1
/
2
"
×
14", 8
1
/
2
"
×
11"
K
A4, B5 JIS, 8
1
/
2
"
×
11"
0827JupiterC1_Copy_EN_F1_FM.book Page 134 Thursday, September 4, 2003 5:06 PM