Filter
Top Products
Basic Procedure
21
2
Left Original Beeper
The beeper sounds and an error mes-
sage is displayed if you leave origi-
nals on the exposure glass after
copying.
Note
❒
See
p.114 “Tone: Original remains”.
Job Preset
You can make settings for the next
copy job while copying is in progress.
If a long copy job is in progress and
you do not want to wait for it to finish,
you can use this function to make set-
tings for the next copy job in advance.
When the current copy job finishes,
the next job begins automatically.
A
AA
A
Press [Next Job] when "
Copying
" is
displayed.
B
BB
B
Make settings for the next copy
job.
C
CC
C
Place the originals in the ADF,
and then press the {
{{
{Start}
}}
} key.
All originals are scanned.
D
DD
D
Press [To "Printing"].
Returns to the initial copy display.
After the current copy job, the next
job starts automatically.
Note
❒ You can switch the display to
the current copy job by pressing
[To "Printing"]. You can switch
the display to the preset job by
pressing [To "Reserving"].
0827JupiterC1_Copy_EN_F1_FM.book Page 21 Thursday, September 4, 2003 5:06 PM