Filter
Top Products
2-60
Using the FAN Guard Slide Lever
Cut suction of the FAN for unused area to protect the head from
suction of the FAN.
Slide the FAN guard slide lever between 50 inch width and 64 inch
width.
Set the FAN guard slide lever according to the paper width you
use.
- When setting the FAN guard slide lever for 50 inch width
paper at 64 inch width paper printing, the paper cannot be
passed.
- Do not move the fan guard slide lever during print.
If the fan guard slide lever hits the paper, paper jam could
be occurred.
-To prevent a jam due to the skew feed, ensure a clearance
of about 5mm between the arrow on the slide lever and
the paper edge.
NOTE
Paper
Slide lever