Filter
Top Products
2-45
Section 2 Basic Operations
Using the Origin Point Setting Function
<Origin Point Setting>
When printing a small size image such as a A4 size image on the
64-inch width paper, the large blank will be generated as the figure
shows below.
In this case, rewind the print paper and set the print origin point to
print an image on the blank area.
The print origin point setting at paper rewinding is called as “Origin
Point Setting Function.”
(1st time printing) (Paper rewinding) (2nd time printing)
<How to Use the Origin Point Setting Function>
1
Lift the pressure roller up/down lever and rewind the
paper.
- Rewind the paper after the paper is enoughly dried.
If not, the 1st time printing image may be damaged.
SET PAPER
PUSH DOWN LEVER
NOTE
Blank area
Pressure roller up/down lever
Origin point
Base point
Paper Feed "FEED"