Filter
Top Products
2-25
Section 2 Basic Operations
Head Print Position Adjustment
(1) Adjustment pattern print
Print the adjustment pattern print position of each head.
1
Select the OFFLINE mode. (Press the key)
2
Press the key twice to display "ADJUST".
3
Press the key and then the key to display
"ADJUST PATTERN".
4
Press the key and select "HEAD ADJ1", and then
press the key.
5
If the key is pressed, the "HEAD ADJ1" of
adjustment patterns is printed.
INK ENTRY
PAPER F•ADJ
FUNK SYSTEM
ADJUST RESET
# ADJUST PATTERN
> TEST PRINT
# ADJUST PATTERN
* HEAD ADJ 1 OK
# ADJUST PATTERN
* EXECUTING
Replacing the Paper Roll