Filter
Top Products
3-27
Section 3 Operation Panel Menu Operations
(24) Paper feed adjustment value priority setting (PRIORITY FEED)
Selects a priority of the paper feed adjustment value.
<Parameter (Enter a value)>
-DATA: Gives priority to data.
-PANEL: Gives priority to the panel.
# BACK ADJUST
>01: +0000 PULSE
- When the tension winding as the winding mode or sequence
2 as the paper feed mode is selected, the printer works at
mode 1 setting even if the mode 2 is selected.
- When selecting mode 2, a joint of print will be generated
because the cleaning is performed during print.
A joint can be adjusted with correction value input at "BACK
ADJUS" menu.
In case a joint cannot be adjusted, use mode 1.
(23) Paper back feed adjustment (unit: pulse)
Adjusts a joint position when the image is separated due to the
automatic cleaning during print.
Input a back feed adjustment value for the paper.
<Parameter (Enter a value)>
- ±2000 pulses (+5 mm)
-1 pulses=2.5 µm
Menu Operations
NOTE
#PRIORITY FEED
>01 : DATA