Filter
Top Products
2-64
Check no dregs of the dried ink and no damage on the blades.
Clean the front and back of the blades with the cleaning swab infiltrated
into the wiper cleaning liquid.
After completion of the cleaning, close the wipe cover and the rear
cover to return the wiper to the position as it was.
-Take extreme care not to allow the wiper cleaning liquid to
attach to the parts other than wiper blades.
Attaching the wiper cleaning liquid to the belts or sensors
may cause a trouble.
Wiper blades
NOTE
<Wiper Sponge Cleaning>
The wiper sponge has to be moistened.
Check the moisture of the sponge every day before printing.
Check whether the sponge is dried by pressing the dried swab on the
sponge.
If the sponge is dried, moisten it with the wiper cleaning liquid.
We recommend applying wiper cleaning liquid of one syringe to the
wiper sponge every day.
Wiper sponge
Syringe