Filter
Top Products
2-66
<Waste Ink Bottle Disposal>
Pour the waste ink into the proper container you prepared and make
the waste ink bottle empty.
<Test Print>
Enter to the “ADJUST” menu and select “TEST PRINT” on the
operation panel. (See page 3-44.)
Check no print dot-off and missing.
Perform the test print as the 1st time print on every day and especially
after cap cleaning for head cleaning.
When the print dot-off occurs at test print, perform slight head cleaning
in the “CLEANING” menu. (See page 2-42.)
<Soft Head Cleaning>
Enter to the “CLEANING” menu and select “SLIGHT” on the
operation panel. (See page 2-42.)
- Do not leave the head carriage at the position other than
on the capping unit for a long time (more than 5 minutes).
- Perform the soft head cleaning after completion of the test
print.
NOTE