Filter
Top Products
2-24
Change During Online Printing
During the online printing, the paper feed adjusting value can be
changed through the following operation.
Head print position adjustment
: 97.00% to 103.00%
Press the or key
(Note: Disabled at the first scan and last scan)
Idle status
PRINT READY
ROLL : 64" (PAPER)
Data receiving start
Data LED flashing
PRINTING
ROLL : 64" (PAPER)
- During "PRINTING" display, press the
or key to display
currently selected paper feed adjusting value. On the right side of the
first row, the value at the start of print is displayed and it does not vary
until the print finished.
However, if a cleaning is executed in the MODE 2 in the midway of
operation, the changed value is displayed after the cleaning.
- With the or key, increase (or decrease) the value in a step of
0.01%.
- When the value is changed, it is reflected in the printing.
- Numerical values you changed are registered and remain unchanged.
- Original display is restored if no key is operated for 3 seconds.
FIN ADJ : 099. 80%
* 099.80%
[Additional functions available from
V2.00 or later]