Filter
Top Products
2-65
Section 2 Basic Operations
NOTE
-Take extreme care not to spill the wiper cleaning liquid on
the parts other than the wire sponge.
Spilling the wiper cleaning liquid on the belts or sensors
may cause a trouble.
#CAP CLEANING
>
NOTE
Clean he edge and periphery
of the upper surface of the
cap.
<Capping Unit Cleaning>
Enter to the SERVICE menu and select “CAP CLEANING” on the
operation panel.
The head carriage will move to the wipe side and you can access easily
to the capping unit.
Open the rear cover and cap cover. Wipe up the edge and periphery of
the upper surface of all (six) caps carefully with the cleaning swab.
Close the cap cover and rear cover. The head carriage will return to the
capping unit position (home position) automatically.
- Do not leave the printer for long time in the condition that
the head carriage is not on the capping unit.
Inspection & Maintenance