Filter
Top Products
1-24
F/W Version Checking Method
Here, the function added in V2.00 as a firmware version checking
method is described.
F/W Version Checking Method
(1) Select the OFFLINE mode. (Press the key)
(2) Press the key to display "SYSTEM".
(3) Select "SYSTEM" with the key, and then press the or key
to display the firmware version.
(4) The F/W version can be checked.
X.XX is the F/W version.
Added Functions in V2.00
INK ENTRY
PAPER F•ADJ
FUNC SYSTEM
ADJUST RESET
# F/W VERSION
* X.XX_YY
1 History print
The function that prints the maintenance history was added.
2Paper feed adjustment
During the online print, the paper feed adjustment correction
value can be changed temporarily with keys.
3Media entry
The registered media information can be copied to a new
area.
4Waste ink value saving
The mode that saves the waste ink quantity during auto
cleaning was added.
5
Manual heater ON
function
The function that turns on the heaters even before the data is
received to save the waiting time until each heater
temperature becomes the set value.
,