Filter
Top Products
2-54
Heater preset temperature by medium
The heater preset temperature for medium is listed in the table.
Preset the heater temperature according to the media you use.
It is recommended that the front heater, the print heater and the rear
heater be set to lower than 50 °C, 45 °C and 50 °C, respectively.
When the print heater is set to higher than 45 °C, we recommend
setting the head motion mode to "HIGHLIGHT."
NOTE
- When the print heater temperature is set to high, fixibility
of the ink is improved, but paper wrinkle or mat print may
be caused.
Adjust heater temperature according to the paper type and
environmental temperature.
- When the print heater temperature is set to high, the printer
may print at low speed to ensure stable print quality .
- Set the front/rear heater temperature higher 5 °C than the
print heater’s.
Bad temperature balance between the front/rear heater
and print heater may cause paper wrinkle.
muideMepyTaideM
teserpdednemmoceR
erutarepmet
edomtnirP
TNORFTNIRPRAER
elynivyssolG
edilorhc
yssolGC°54C°04C°54
htap4
noitcerid-ib
edilorhcelynivtaMettaMC°54C°04C°54
htap4
noitcerid-ib
rennaBrennaBC°54C°04C°54
htap4
noitcerid-ib