Filter
Top Products
Inbound Routing
106
10
Enter a sender’s fax number (max. 20 digits) by pressing the numeric
keys and then press . Repeat until all you have entered all desired
sender’s numbers.
Example: If the sender’s number is 210-555-1212, enter 2105551212.
Do not
enter 12105551212 (do not enter “1” for a long distance number).
• A combined total of up to 410 sender’s numbers can be entered for all sets.
A sender’s number that is already entered in another set cannot be entered.
• If you need to delete a sender’s number, press or to select the
number and then press .
11
Press .
12
Enter the forwarding e-mail addresses using any of the following
methods:
• Press a Rapid Key.
• Press and enter a Speed Dial number. (If you enter less than 3
digits for the number, press to complete the entry.)
• Press , enter an e-mail address, and then press . (Maximum
of 20 full e-mail addresses.)
Note: If you need to delete an e-mail address, press or to select
the address and then press .
Note: Scan to FTP and Scan to Desktop destinations cannot be selected.
13
When you have entered all forwarding
e-mail addresses, press .
START/
ENTER
STOP
START/
ENTER
SPEED DIAL
START/
ENTER
e-mail
START/
ENTER
STOP
START/
ENTER
3:ENTRY MODE
ENTER #(01-10, , )
FAX TRANSFER SET # 01
1=ACTIVATE NOW
2=ACTIVATE LATER
all.book Page 106 Thursday, May 13, 2004 8:51 AM