Sharp FODC600 All in One Printer User Manual


 
Installing the Printer Driver
122
Installing the Printer Driver
The SHARP PCL XL printer driver printer driver is provided in the CD-ROM in
the FO-NP1 printer kit. This driver must be installed in every computer that
uses the printer.
Important: The printer driver cannot be installed unless the FO-NP1 Printer
Expansion Kit and FO-LN1 LAN interface have been installed in the machine
and the machine is ready for use as a network printer.
Before installing the printer driver, be sure to read the “Readme” file on the
CD-ROM (Option\English\Readme.txt) for the latest information.
System Requirements
You will need the following hardware and software in order to install the printer
driver.
Printing out the IP address of the printer
In some cases it is necessary to enter the IP address of the machine when
installing the printer driver. To check the IP address, follow the procedure in
Printing out the Network Settings
on page 79.
Computer IBM PC/AT or compatible computer equipped with an
Ethernet interface
Operating System Windows 98 Second Edition, Windows Me, Windows NT
4.0 Workstation/Server (Service Pack 3 or later),
Windows 2000 Professional/Server, XP Home/
Professional.
CPU Windows 98 / Windows NT 4.0 / Windows Me / Windows
2000: Pentium, 200 MHz or higher
Windows XP: Pentium, 300 MHz or higher
RAM Windows 98 / Windows NT 4.0 / Windows Me / Windows
2000: 64 MB or higher
Windows XP: 128 MB or higher
all.book Page 122 Thursday, May 13, 2004 8:51 AM