Filter
Top Products
Adjusting the Resolution and Contrast
35
2. Send/Receive
Documents
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
Resolution
The machine has four resolution settings:
The default resolution setting is STANDARD. If you don’t adjust the resolution
before sending a document, the machine will automatically use STANDARD
resolution.
♦ In order to transmit in FINE, SUPER FINE, or ULTRA FINE resolution, the
receiving machine must also have that resolution. If it doesn’t, the next best
available setting will be used.
♦ The resolution settings are only effective for transmitting and copying a
document. They are not effective for receiving a document.
STANDARD Use STANDARD for ordinary documents. This
setting gives you the fastest and most economical
transmission.
FINE Use FINE for documents containing small letters or
fine drawings.
SUPER FINE Use SUPER FINE for documents containing very
small letters or very fine drawings.
ULTRA FINE Use ULTRA FINE for the highest level of document
reproduction.
HALF TONE Use HALF TONE for photographs and illustrations.
The original will be reproduced in 64 shades of gray.
3
Adjust the resolution and/or contrast settings (if desired) and then dial
the receiving machine as explained in the following sections.
all.book Page 35 Thursday, May 13, 2004 8:51 AM