Filter
Top Products
9·30
Remarks
From the previous page
Set whether the station number information should be output or not
· Set whether the station number information should be output or not on the parameter address
007763
(8)
.
007763(8)
00(H): Do not output
01(H): Output
The station number information is output on the next
byte of the flag area (24 bytes.)
Whether the station
number information
should be output or not
V5
Set top address of flag area
File address: OCT (octal), word
File number/flag: HEX (hexadecimal), byte
· Set the top address of the flag area (24 bytes) in order to monitor the communication condition
and PC operation condition on the parameter address 007764 to 007767
(8)
.
·Flag area uses 24 bytes regardless number of connecting stations.
V5
007764(8)
007765(8)
007766(8)
007767(8)
Lower
Upper
File number
Output flag : ON
Do not output flag : OFF
D
7
Initial value
E0
(H)
01
(H)
00
(H)
80
(H)
Contents
01E0
(H)
000740
(8)
0740
File number 0
Output flag
Byte address
· The PC's input/output relays, auxiliary relays, registers etc. are all allocated individual byte
addresses for each item. However, the JW-20CM can assign these addresses with file
addressees allocated throughout the memory.
· The usable file numbers will vary with the memory module that is installed on the PC.
To the next page
eludomyromemfoemaN srebmunelifelbasU
HAM1-WJ,AM1-WZ1ro0
HAM2-WJ,AM2-WZ1ro0
HAM3-WJ,AM3-WZ2,1,0
HAM4-WJ,AM4-WZ7,6,5,4,3,2,1,0
I/O relay
Auxiliary relay
Latch relay
General purpose relay
TMR/CNT
time limited contact
TMR/CNT/MD
current value
File address
000377
000400
000677
000700
000777
001000
001577
001600
001777
002000
003777
Byte address
0000
00377
00400
00677
00700
00777
01000
01577
b0000
b17777
ZW model PCs
JW model PCs
Register
Register
File address
004000
004777
005000
005777
006000
015777
Byte address
09000
09777
19000
19777
29000
99777
ZW model PCs
JW model PCs
If file number is 1, file
address shall be within
000000 to 037777
(8)
.
(See page 13·20 and 21
for other cases.)